SpletThe PDS 2010 Labcoter 2 Parylene Deposition System can be used for deposition of Parylene (poly-para-xylylene) onto a variety of substrates. The clear polymer coating formed provides an extremely effective chemical and moisture barrier with high dielectric and mechanical strength. The coating is biocompatible and deposits in a highly conformal way. SpletAfter the MWCNT forest is grown uniformly on the whole surface, parylene is vapor deposited onto the MWCNT forest at room temperature using a PDS 2010 LABCOTER (Specialty coating systems ...
Nano3: Equipment
Splet27. jan. 2015 · SCS PDS 2010 Labcoter 2 SOP Revision 1.0 Page 3 of 27 SCS PDS 2010 Labcoater 2 Parylene Deposition System Standard Operating Procedures This system is … how many days to get to moon
Fabrication process flow for CNT nanoarray electrodes.
SpletPDS 2010 Labcoter 2 Protocol – Version 19/13/10. 1. PDS 2010 LABCOTER 2 PROTOCOL – NCF CLEANROOM 026. This protocol describes the basic operation of the PDS 2010 LABCOATER 2 parylene deposition system. The LABCOATER 2 is located in the cleanroom. The vacuum pump is located in maintenance room 028. Spletheaters (PDS 2010 Labcoter 2, SCS Specialty Coating System). The contacts were covered with tape for accessibility. The contour of the fluidic channels was cut in a 50 mm thick pressure sensitive double-sided adhesive tape (ARSeal 90880, Adhesive Research Inc.) by a UV-laser with a wavelength of 355 nm (LS Lasersystem GmbH). SpletOctober 24, 2024. SCS recently introduced its new Labcoter ® 3 Parylene deposition system (PDS 2010). Designed for use in university research and R&D environments, SCS’ Labcoter delivers the capability to reliably create … high swivel bucket bar stool